Sharp 25NS100 25NS100|25NS180|27NS100|27NS180 Operation Manual - Page 7

Quick Reference Control Operation L Location of Controls 25N-S100, 25N-S180 Front Panel A POWER A Press → On. Press again → Off. B VOLUME UP/DOWN (+) Increases sound. (-) Decreases sound. C SENSOR AREA FOR REMOTE CONTROL D CHANNEL UP/DOWN (8) Selects next higher channel. (9) Selects next lower channel. • Press both at same time to access MAIN MENU Screen. A E VIDEO/AUDIO IN 2 TERMINALS (VIDEO/AUDIO terminals are also provided on the rear.) POWER - VOL + CH POWER - VOL + CH E B CD 27N-S100, 27N-S180 E B C D Basic Remote Control Functions POWER Press → On. Press again → Off. REMOTE KEYPAD Accesses any channel from keypad. FLASHBACK Returns to previous channel. PERSONAL PREFERENCE With the Personal Preference buttons, you can program your favorite programs by using the four categories A, B, C and D. The channels can be accessed quickly by using these buttons. (See page 30.) Infrared Transmitter Window DISPLAY Press → Displays receiving channel for four seconds. Press again → Removes display. • Temporarily displays receiving channel when in Closed Caption mode. INPUT Press → Switch to external video INPUT 1 mode. Press again → Switch to external video INPUT 2 mode. Press again → Switch back to the original TV mode. See page 33. VOLUME UP/DOWN (+) Increases sound. (-) Decreases sound. • In menu mode, changes or selects the TV adjustments. MENU Press → Accesses MAIN MENU. Press again → Exits MAIN MENU. TV-CATV MODE SELECT SWITCH In TV position, sends power and channel select commands (Channel up/down and Random Access buttons) to the TV. In CATV position, sends power and channel select commands to a cable TV converter. VCR CONTROL See page 34. ENTER Used in some instances where a VCR or Cable Converter Box requires an "enter" command after selecting channels, when using the REMOTE KEYPAD button. (See page 34) CHANNEL UP/DOWN (8) Selects next higher channel. (9) Selects next lower channel. • See pages 27 - 29 for channel presetting. • Moves the " " mark of the MENU screens. MUTE Press → Mutes sound. Press again → Restores sound. • CLOSED CAPTION appears when sound is muted. NOTE: • The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the remote control, place it under a fluorescent light or other lighting. • The phosphorescent material contains no radioactive or toxic material, so it is safe to use. • The degree of illumination will vary depending on the strength of lighting used. • The degree of illumination will decrease with time and depending on the temperature. • The time needed to charge the phosphorescent display will vary depending on the surrounding lighting. • Sunlight and fluorescent lighting are the most effective when charging the display. 7 0-9 25&27NS100/180 1.4 7 6/1/00, 2:06 PM