Sharp A1000 UXA100 Operation Manual - Page 116
Dialing and transmission problems
![]() |
View all Sharp A1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Problems and Solutions Dialing and transmission problems Problem Solution No dial tone when you pick up the handset or press the SPEAKER key. • Make sure the handset cord is connected to the correct jack. See Connecting the handset on page 11. • Make sure that the telephone line is properly connected to both the TEL. LINE jack and the wall jack (see page 11). • Make sure that the telephone line is good. Dialing is not possible. • Make sure the power cord is properly plugged into a power outlet. • Make sure that the telephone line is properly connected to both the TEL. LINE jack and the wall jack (see page 24). • Make sure that the fax machine is set to the correct dialing mode for your telephone line. See Dial mode on page 24. The power is on, but no transmission takes place. • Make sure that the receiving machine has paper. • Make sure that the telephone line cord is plugged into the TEL. LINE jack, and not the TEL. SET jack. • If the receiving machine is in manual mode with no attendant, reception will not be possible. • Check the display for error messages. • Pick up the handset and check for a dial tone. Dial the receiving machine manually and make sure that it is responding (you should hear a fax tone). Nothing is printed at the receiving end. • Make sure that the document for transmission is placed face down in the feeder. 114
![](/manual_guide/products/sharp-uxa100-uxa100-operation-manual-9682dca/116.png)