Sharp A1000 UXA100 Operation Manual - Page 19
Installing the Print Cartridge - ux cartridge
![]() |
View all Sharp A1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
1. Installation Installing the Print Cartridge Installing the Print Cartridge Follow these steps to install or replace the print cartridge. ♦ When replacing the print cartridge, be sure to use a SHARP UX-C70B cartridge. Print cartridge yield (at 4% coverage) Initial cartridge Ink Save mode ON: Approx. 300 letter pages Ink Save mode OFF: Approx. 200 letter pages Replacement cartridge (SHARP UX-C70B) Ink Save mode ON: Approx. 600 letter pages Ink Save mode OFF: Approx. 400 letter pages Ink Save mode is initially turned off. To turn on Ink Save mode, see page 23. Caution! Do not open the print compartment cover of the machine while it is printing. If opened while printing, printing will stop. Note: Keep ink cartridges sealed in their packages until you are ready to install them. It is recommended that you do not use a cartridge that has been left unused for a long time after opening, as the print quality may be considerably degraded. ♦ Make sure the power cord of the machine is plugged in and paper is loaded before installing or replacing the print cartridge. 1 Open the operation panel. If PRINTER ERROR or PRINTER ERROR/CHECK PAPER appears... In the event that the display shows either of the above messages, you must clear the error before installing the print cartridge. The error can usually be cleared by opening and closing the print compartment cover (see Step 2), or if a paper jam has occurred, by removing the paper jam (see page 121). 17
![](/manual_guide/products/sharp-uxa100-uxa100-operation-manual-9682dca/19.png)