Sharp A1000 UXA100 Operation Manual - Page 16
Loading Printing Paper - copiers
View all Sharp A1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Loading Printing Paper Loading Printing Paper You can load letter or legal size paper in the paper tray. Recommended paper weight is 20-lb. Copy Bond. The maximum number of sheets is as follows: Letter size: Approx. 200 sheets (20-Ib. copier paper at room temperature; maximum stack height should not exceed line on tray) Legal size: Approx. 100 sheets (20-Ib. copier paper at room temperature) 1 Pull the paper plate toward you, and remove the paper tray cover from the paper tray. 2 If you are going to load legal paper, flip up the paper tray extension. 3 Pull the paper plate toward you and insert the stack of paper into the tray, PRINT SIDE UP. • If paper remains in the tray, take it out and combine it into a single stack with the new paper. The stack should not be higher than this line Be sure to load the paper so that printing takes place on the print side of the paper. Printing on the reverse side may result in poor print quality. 14