Sharp AF-S60EX AFS50EX|AFS60EX Operation Manual - Page 6

INSTALLATION INSTRUCTIONS INSTALLATION WARNING: Make sure the unit is turned off and unplugged before working. 1 Cut the window sash foam seal (adhesive type) to the proper length and attach it to the underside of the window sash. Jamb Sash Sill Window sash foam seal (adhesive type) 2 Insert the right closure assembly and the left closure assembly into the top angle and the bottom channels. Secure the right and left closure to the cabinet with six of the provided screws. (L= 13/32", 10mm) Closure assembly 3 Open the window sash and place the air conditioner on the sill. Balance the unit on the sill and close the window sash securely behind the top angle. WARNING: At this step, make sure the unit is inclined approximately 1 cm (3/8") to the back. If the unit is not properly inclined, the water collected in the bottom tray during opera- tion will not drain properly and may flow into the room where the air conditioner is in- stalled. sill unit incline backwards approximately 1cm (3/8") 4 Insert the bottom gasket into the space between the window sill and the bottom of the unit to seal outside air. If there is space between the bottom channel and the sill, fill the gap with a thin board or other hard filler. 6 Bottom gasket