Sharp AJ-2000 AJ-Printer Interactive Operation Manual for Windows® - Page 45

Aligning the Print Head (part 1) Maintenance Align the print head after installing or changing the print head, or if printed lines are not straight, or have blank spaces. Follow the steps below to align the print head. 1 Make sure that Letter sized paper is set in the tray. 2 Click the "Advanced" tab in the properties dialog box, and then click "Maintenance" button. 5 Check the test chart results, and change the preferences to the best setting for each pattern. 3 Click the "Start" button of "Print alignment patterns". 4 Click the "OK" button. 1 Select a pattern sample for "Pattern A". Look at the chart A on your test chart. Select the number under the pattern sample, in which is located the closest to the center of the two vertically parallel lines. Example: -8 +8 -8 -7 -6 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 +6 +7 +8 The "Align print head" dialog box will appear, and a test chart will be printed. How to Use the Printer Properties Online Manual Print Print Status Window Sharing Printer 43 Maintenance Troubleshooting