Sharp AL 1551CS AL-1651CS AL-1661CS Operation Manual - Page 24
Loading paper in the bypass tray
UPC - 074000074507
View all Sharp AL 1551CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
LOADING PAPER Loading paper in the bypass tray Note • Paper must be fed narrow side first into the feed slot. • Special papers such as transparency film, labels, and envelopes must be fed one sheet at a time through the bypass tray. • When copying onto transparency film, remove each copy promptly. Do not let copies stack up. 1 Open the bypass tray and extend the tray. Note To close the bypass tray, perform step 1 and then step 2 in the illustration and push the round projections at the right of the tray until they click. 2 Set the bypass tray paper guides to the paper width. Insert the paper (print face down) all the way into the bypass tray. 3 Press the [TRAY SELECT] key ( Print face ) to select the bypass tray. 22
LOADING PAPER
22
Loading paper in the bypass tray
1
Open the bypass tray and extend the tray.
2
Set the bypass tray paper guides to the paper width. Insert the
paper (print face down) all the way into the bypass tray.
3
Press the [TRAY SELECT] key (
) to select the bypass tray.
•
Paper must be fed narrow side first into the feed slot.
•
Special papers such as transparency film, labels, and envelopes
must be fed one sheet at a time through the bypass tray.
•
When copying onto transparency film, remove each copy promptly.
Do not let copies stack up.
To close the bypass
tray, perform step 1
and then step 2 in
the illustration and
push the round
projections at the
right of the tray until
they click.
Note
Note
Print face