Sharp AL 1551CS AL-1651CS AL-1661CS Operation Manual - Page 75
Troubleshooting The Machine
UPC - 074000074507
View all Sharp AL 1551CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
TROUBLESHOOTING THE MACHINE The following problems are related to the general operation of the machine and copying. Problem Cause and solution Page The machine is not plugged into a power outlet. → Plug the machine into a grounded - outlet. Power switch OFF. → Turn the power switch ON. 16 The power save indicator is blinking. Indicates that the machine is warming up. - → Copies cannot be made until the The machine does not machine has finished warming up. operate. The front cover or the side cover is not completely closed. - → Close the front cover or the side cover. The machine is in auto power shut-off mode. → In auto power shut-off mode, all lights are off except the power save indicator. 17 Press the [START] key ( ) to resume normal operation. The scan head locking switch is locked. → Unlock the scan head locking switch. 13 Select the correct original type for the original. → Select AUTO with the [EXPOSURE] 27 key or press the [ ] key ( ) or [ ] Copies are too dark or key ( ) to manually select an too light. appropriate exposure. → If the copy is too light or too dark even 67 though AUTO was selected with the [EXPOSURE] key, adjust the automatic exposure level. Blank copies. The original is not placed face up in the RSPF or face down on the document 8 glass. 24, 25 → Place the original face up in the RSPF or face down on the document glass. 73