Sharp AL-1640 AL-1640 Operation Manual - Page 30

Toner Save Mode

Get Sharp AL-1640 - B/W Laser - Copier PDF manuals and user guides View all Sharp AL-1640 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

TONER SAVE MODE This mode reduces toner consumption by approximately 10% in the automatic and manual exposure modes. Copies will be lighter but still adequate for general use. Selection of this mode does not affect the PHOTO ( ) mode. Follow the procedure below for setting the toning level. MAKING COPIES Toner save mode 1 Press the AUTO/MANUAL/PHOTO ( to select the MANUAL ( ) mode. / / ) key 2 Press and hold down the AUTO/MANUAL/PHOTO ( / ) key for approximately 5 seconds. / q The MANUAL ( ) indicator will go out and the PHOTO ( ) indicator will begin to blink. q The exposure indicator marked "5" will light up, indicating that the standard toner mode is active. 3 To enter the toner save mode, press the light ( ) key. q The exposure indicator marked "1" will light up, indicating that the toner save mode is selected. 4 Press the AUTO/MANUAL/PHOTO ( / / ) key. q The PHOTO ( ) indicator will stop blinking and will light up steadily. The toner save mode is now active. q To return to the standard mode, repeat the procedure but use the dark ( ) key to select exposure level "5" in step 3. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
29
MAKING COPIES
Toner save mode
TONER SAVE MODE
This mode reduces toner consumption by approximately 10% in the automatic
and manual exposure modes. Copies will be lighter but still adequate for
general use. Selection of this mode does not affect the PHOTO (
) mode.
Follow the procedure below for setting the toning level.
1
Press the AUTO/MANUAL/PHOTO (
/
/
) key
to select the MANUAL (
) mode.
2
Press and hold down the AUTO/MANUAL/PHOTO (
/
/
) key for approximately 5 seconds.
●
The MANUAL (
) indicator will go out and the PHOTO (
)
indicator will begin to blink.
●
The exposure indicator marked “5” will light up, indicating that the
standard toner mode is active.
3
To enter the toner save mode, press the light (
) key.
●
The exposure indicator marked “1” will light up, indicating that the
toner save mode is selected.
4
Press the AUTO/MANUAL/PHOTO (
/
/
) key.
●
The PHOTO (
) indicator will stop blinking and will light up
steadily. The toner save mode is now active.
●
To return to the standard mode, repeat the procedure but use the dark
(
) key to select exposure level “5” in step 3.