Sharp AL-1640 AL-1640 Operation Manual - Page 8
Tray Select
View all Sharp AL-1640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
PART NAMES AND FUNCTIONS GETTING STARTED Part names and functions !7 AUTO IMAGE key and indicator Press for automatic copy ratio selection. !8 TRAY SELECT ( ) key (p. 15) Use to manually select a paper tray. !9 PRESET RATIO selector keys and indicators (p. 17) Use to sequentially select preset reduction/enlargement copy ratios: 50%, 64%, 77%, 95%, 100%, 121%, 129%, 141%, 200%. @0 ZOOM indicator (p.17) Lights up when a zoom ratio is set. @1 Zoom keys (p. 17) Use to select any reduction or enlargement copy ratio from 50% to 200% in 1% increments. @2 Copy ratio display ( ) key (p. 17) Press and hold down during standby to display the copy ratio in the copy quantity display. @3 Copy quantity keys Use to select the desired copy quantity or to make user program entries. @4 CLEAR ( ) key Clears the copy quantity display or terminates a copy run. Press during standby to display the total number of copies made to date. 1st display 2nd display Press and hold down the key. 12,345 sheets output Note: 11" x 17" size copies are counted as two copies. @5 START ( ) key and indicator Copying is possible when the indicator is on. Press to start copying. Initial settings The copier assumes the initial settings when it is first turned on, when the CLEAR ALL ( ) key is pressed, or approximately one minute* after the last copy is made in any mode. q Copy ratio: 100% q Exposure: Automatic q Copy quantity: 0 q Paper feed station: Previously selected paper tray * This time (auto clear time) can be changed. See page 32, USER PROGRAMS. 7