Sharp AL-1640 AL-1640 Operation Manual - Page 45
Copier Trouble?
View all Sharp AL-1640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
COPIER TROUBLE? Problem Copier does not operate. Copies are too dark or too light. Blank copies Copies smear if rubbed. q Copier plugged in? Solution Plug the copier into a grounded outlet. See page 8. q Power switch ON? Turn the power switch ON. See page 15. q Copy density properly adjusted? See pages 15 and 22. q Is the original placed face down? Place the original face down on the original table. q Paper too heavy? Use copy paper within the specified range. See page 40. q Paper damp? Replace with dry copy paper. Be sure to store copy paper in a dry location. See page 41. Striped copies q Is transfer charger clean? Clean the transfer charger. See page 37. q Non-standard paper used? Paper misfeeds frequently. q Paper properly installed? q Pieces of paper inside copier? q Paper curled or damp? Copies are smudged or dirty. q Original table or platen cover dirty? q Original smudged or blotchy? Use standard paper. If using special paper, feed the paper through the bypass tray. See pages 18 and 40. Make sure the paper is properly installed. See pages 13 and 18. Remove all pieces of misfed paper. See page 28. Store copy paper flat in the wrapper in a dry location. See page 41. Clean regularly. See page 36. Use a clean original. Copier trouble? GENERAL INFORMATION 44