Sharp AR-151 AR-151 Operation Manual - Page 31
Developer Required, Maintenance Required
![]() |
View all Sharp AR-151 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Copier trouble? MISFEED REMOVAL Push gently on both sides of the front cover to open the cover. Rotate the feeding roller in the direction of the arrow and gently remove the misfed paper from the exit area. Feeding roller 5 Raise the fusing unit release lever, close the front cover and then close the side cover by pressing the round projections near the side cover open button. The misfeed ( ) indicator will go out and the ready ( ) indicator will light up. When closing the covers, be sure to close the front cover securely and then close the side cover. If the covers are closed in the wrong order, the covers may be damaged. DEVELOPER REQUIRED When the indicator lights up, the developer should be replaced.DEVELOPER REPLACEMENT SHOULD ONLY BE DONE BY AN AUTHORIZED SHARP SERVICE TECHNICIAN. Contact your service center as soon as possible. MAINTENANCE REQUIRED When indicator lights up, service by an authorized SHARP service technician is required. Contact your service center as soon as possible. 29
![](/manual_guide/products/sharp-ar151-ar151-operation-manual-0117da7/31.png)