Sharp AR-151 AR-151 Operation Manual - Page 6
Cautions - installer
![]() |
View all Sharp AR-151 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
CAUTIONS Follow the cautions below when using this copier. q The fusing area is hot. Exercise care in this area when removing misfed paper. q Do not look directly at the light source. Doing so may damage your eyes. 1 q Do not switch the copier rapidly on and off. After turning the copier off, wait 10 to 15 seconds before turning it back on. q Copier power must be turned off before installing any supplies. Getting started q Place the copier on a firm, level surface. q Do not install the copier in a humid or dusty location. q When the copier is not used for a long time, for example, for consecutive holidays, turn the power switch off and remove the power cord from the outlet. q When moving the copier, be sure to turn the power switch off and remove the power cord from the outlet. q Do not cover the copier with a dust cover, cloth or plastic film while the power is on. Doing so may prevent heat radiation, damaging the copier. q Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. SAFETY PRECAUTIONS This Digital Copier is rated Class 1 and complies with 21 CFR 1040.10 and 1040.11 of the CDRH standards. This means that the copier does not produce hazardous laser radiation. For your safety, observe the precautions below. q Do not remove the cabinet, operation panel or any other covers. q The copier's exterior covers contain several safety interlock switches. Do not bypass any safety interlock by inserting wedges or other items into switch slots. 4
![](/manual_guide/products/sharp-ar151-ar151-operation-manual-0117da7/6.png)