Sharp AR-151 AR-151 Operation Manual - Page 33

STATUS INDICATORS When the following indicators light up or blink on the operation panel or the following alphanumeric codes appear in the display, solve the problem immediately referring to both the table below and the relevant page. Be sure to use only genuine SHARP parts and supplies. Indication Cause and remedy See page: Developer replacement Steadily Developer is required. Contact your SHARP 29 required indicator lit service center as soon as possible. Toner cartridge replacement Steadily Replacement of toner cartridge will be needed 22 lit soon. Obtain a new cartridge. required indicator Blinking Toner cartridge must be replaced. Replace it with a new one. 22 A misfeed has occurred. Remove the misfed 26 Misfeed indicator Blinking paper referring to the description of "Misfeed removal". Maintenance Steadily Service by an authorized SHARP service 29 5 indicator lit technician is required. SPF misfeed indicator An original misfeed has occurred in the SPF. 38 Blinking Remove the misfed originals referring to the description of "Misfeed in the SPF". The paper tray indicator The paper tray is not installed properly. _ is blinking. Push the tray into the copier securely. Copier trouble? The toner cartridge is not installed. Install the 22 "CH" is blinking in the display. toner cartridge. If "CH" is blinking even if the cartridge is installed properly, contact your SHARP service center immediately. "CH" is steadily lit in the display. Side cover is open. Close the side cover securely by pressing the round projections near the side cover open button. _ Paper tray or bypass tray is empty. Load copy 10 "P" is blinking in the display. paper. A misfeed has occurred in the paper tray or 26 bypass tray. Remove the misfed paper. A letter and a number appear The copier will not function. Turn the power _ alternately. switch off, remove the power cord from the outlet, and contact your SHARP service center. 31