Sharp AR-208D AR-208S AR-208D Operation Manual Suite - Page 226

CONFIGURING THE PRINTER DRIVER After installing the printer driver, you must configure the printer driver settings appropriately for the number of paper trays on the machine and the size of paper loaded in each tray. 1 Click the "start" button, click "Control Panel", click "Printers and Other Hardware", and then click "Printers and Faxes". • In Windows Vista, click the "Start" button, click "Control Panel" and then click "Printer". • In Windows Server 2003, click the "Start" button and then click "Printers and Faxes". • In Windows 98/Me/2000, click the "Start" button, select "Settings", and then click "Printers". 4 Click the "Configuration" tab and set the printer configuration based on the options that have been installed. Set the printer configuration properly. Otherwise, printing may not take place correctly. 2 Click the "SHARP XX-XXXX" printer driver icon and select "Properties" from the "File" menu. • If you are using Windows 2000/XP/Server 2003/Vista, go to step 4. • In Windows Vista, from the "Organize" menu select "Properties". To automatically configure the settings Note based on the detected machine status, click the "Auto Configuration" button. 3 In Windows 98/Me, click the "Setup" tab. 5 Click the "Set Tray Status" button and select the size of paper that is loaded in each tray. Select a tray in the "Paper source" menu, and select the size of paper loaded in that tray from the "Set Paper Size" menu. Repeat for each tray. Windows 6 Click the "OK" button in the "Set Tray Status" window. 7 Click the "OK" button in the printer properties window. - 18 -