Sharp AR-208D AR-208S AR-208D Operation Manual Suite - Page 57

USER SETTINGS Program number Program name Setting codes (factory default setting appears in bold) Explanation 1: 5 MIN. 4 AUTO SHUT-OFF TIME 2: 30 MIN. 3: 60 MIN. 4: 120 MIN. 5: 240 MIN. • This function automatically switches the machine to a state that consumes even less power than preheat mode if the set duration of time elapses without the machine being used when the power is on. All lights except the power save indicator go off. To resume normal operation, press the [START] key ( ). Normal operation also resumes automatically when a print job is received or scanning is begun from a computer. While in auto power shut-off mode, no keys (except the [START] key ( )) can be used. • Use this setting to select the 7 LAYOUT IN 2IN1 1: PATTERN 1 2: PATTERN 2 layout pattern when two original pages are copied onto a single sheet of paper (see page 31 for the layout patterns). 8 OFFSET FUNCTION 1: ON 2: OFF • When enabled, this function offsets the position of each set of copies in the output tray in copy mode, and each print job in printer mode. 9 ROTATE ORIG. IMAGE* 1: ON 2: OFF • When two-sided copying is performed, this function rotates the image on the back of the original. This is convenient when binding the copies at the 7 top (tablet binding). 10 AE/TEXT RESOLUTION 1: 300dpi 2: 600dpi • This setting is used to change the copy resolution in AUTO and TEXT mode from 600 x 300 dpi to 600 x 600 dpi (high-quality mode). Scanning is slower when high-quality mode is used. * AR-208D only 55