Sharp AR-208D AR-208S AR-208D Operation Manual Suite - Page 58
HI-SPEED, NORMAL, Program, number, Program name, Setting codes, Explanation
View all Sharp AR-208D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
USER SETTINGS Program number Program name Setting codes (factory default setting appears in bold) Explanation 11 2-SIDED COPY MODE* 1: HI-SPEED 2: NORMAL • If the memory fills up when twosided copying is performed, "NORMAL" can be selected to make copying possible. However, "NORMAL" results in a slower copying speed. Normally "HI-SPEED" is selected to enable fast two-sided copying. 1: 1/4" 12 MARGIN WIDTH 2: 1/2" 3: 3/4" 4: 1" • Use this setting to set the margin width. 13 MEM. FOR PRINTER 1: 30% 2: 40% 3: 50% 4: 60% 5: 70% • Use this to change the proportion of machine memory used for printer mode. 14 AUTO KEY REPEAT 1: ON 2: OFF • Use this setting to select whether or not holding down a key causes repeated input of the key. For keys that normally cause a set value to decrease or increase when held down (for example, the [ ] key ( ) or [ ] key ( )), this program can be used to have the set value not change when the key is held down. 1: NORMAL 2: 0.5 SEC. 15 KEY PRESS TIME 3: 1.0 SEC. 4: 1.5 SEC. 5: 2.0 SEC. • Use this setting to select how long a key must be pressed for the input to be accepted. By selecting a longer time, you can prevent settings from being changed by the accidental pressing of a key. 16 KEY TOUCH SOUND 1: LOW 2: HIGH 3: OFF • This sets the volume of beep signals. (p.60) 17 SOUND AT DEFAULT 1: ON 2: OFF • Use this to sound a beep when a base setting is selected. (p.60) 18 TONER SAVE MODE 1: ON 2: OFF • This mode reduces toner usage by about 10% when copying. Toner save mode is effective when the exposure mode is AUTO or TEXT. * AR-208D only 56