Sharp AR-287 AR-287 , AR-337 , AR-407 Operation Manual - Page 85
Adding Toner - toner cartridge
View all Sharp AR-287 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
ADDING TONER The message "(TONER SUPPLY IS LOW. PRESS FOR GUIDANCE.)" will appear in the message display before the toner supply is completely empty. If copying is continued, copies will gradually become lighter until the copier stops and the message display changes to "ADD TONER. PRESS FOR GUIDANCE." indicating that the toner supply is empty. Toner can be added any time after the message "(TONER SUPPLY IS LOW. PRESS FOR GUIDANCE.)" appears. To add toner, stop the copier and proceed as below. When either message appears, you can use the INFORMATION key for detailed information as necessary. During long copy runs of multiple originals containing many images and/or dark shades, "TONER REPLENISHMENT IN PROGRESS." will appear and the copier will stop making copies even though toner is left. The copier will automatically cycle and replenish the toner to the normal level and then the START key indicator will light up. Press the START key to resume copying. For best copying results, be sure to use only Sharp Genuine Supplies which are designed, engineered, and tested to maximize the life and performance of Sharp copiers. Look for the Genuine Supplies label on the toner package. GENUINE SUPPLIES 4 CHAPTER SUPPLIES Adding toner 1 Open the front cover. 2 Pull down the toner hopper lock lever and pull the toner hopper out slowly until it stops. 5X 20X 20X 3 Tap on the top of the toner cartridge 5 times. Hold the new toner cartridge vertically and vigorously shake it up and down about 20 times, then invert the cartridge and again shake it up and down about 20 times. This will loosen the toner and allow it to flow more easily into the toner hopper. 4-5