Sharp AR-5316 AR-5316 Operation Manual - Page 51

Misfeed In The Machine - drum unit

Get Sharp AR-5316 PDF manuals and user guides View all Sharp AR-5316 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

TROUBLESHOOTING MISFEED IN THE MACHINE 1 Open the bypass tray and the side cover. 2 Check the misfeed location. Remove the misfed paper following the instructions for each location in the illustration below. If the misfed paper is visible here, go to "C. Misfeed in the transport area". If paper is misfed here, go to "A. Misfeed in the paper feed area". A. Misfeed in the paper feed area 1 Push gently on both ends of the front cover. If paper is misfed here, go to "B. Misfeed in the fusing area". 3 Close the front cover and side cover. The misfeed indicator ( ) will go out. 5 2 Carefully remove the misfed paper. Turn the roller rotating knob in the direction of the arrow to assist in removing it. Roller rotating knob Be careful not to tear the misfed paper during removal. Note • When closing the front cover, gently hold both ends. • When closing the side cover, press on the handle. • If the misfeed indicator ( ) does not stop blinking, check for torn pieces of paper in the machine. The fusing unit is hot. Do not touch Warning the fusing unit when removing misfed paper. Doing so may cause a burn or injury. Do not touch the drum cartridge (green Caution portion) when removing the misfed paper. Doing so may damage the drum and cause smudges on copies. 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
49
TROUBLESHOOTING
5
MISFEED IN THE MACHINE
1
Open the bypass tray and the side
cover.
2
Check the misfeed location. Remove
the misfed paper following the
instructions for each location in the
illustration below.
A. Misfeed in the paper feed area
1
Push gently on both ends of the front
cover.
2
Carefully remove the misfed paper.
Turn the roller rotating knob in the
direction of the arrow to assist in
removing it.
Be careful not to tear the
misfed paper during
removal.
3
Close the front cover and side cover.
The misfeed indicator
(
) will go out.
If paper is misfed here, go to "B.
Misfeed in the fusing area".
If paper is misfed here, go to "A.
Misfeed in the paper feed area".
If the misfed paper is visible
here, go to "C. Misfeed in the
transport area".
The fusing unit is hot. Do not touch
the fusing unit when removing misfed
paper. Doing so may cause a burn or
injury.
Do not touch the drum cartridge (green
portion) when removing the misfed paper.
Doing so may damage the drum and cause
smudges on copies.
Roller rotating knob
Warning
Caution
•
When closing the front cover, gently hold
both ends.
•
When closing the side cover, press on the
handle.
•
If the misfeed indicator (
) does not stop
blinking, check for torn pieces of paper in
the machine.
Note