Sharp AR-M205 AR-M160 AR-M205 Operation Manual - Page 39
Erasing Shadows Around The, Edges Of A Copy
View all Sharp AR-M205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
ERASING SHADOWS AROUND THE EDGES OF A COPY (Erase copy) ● This feature is used to erase shadows that appear around the edges of copies of books and other thick originals. (EDGE ERASE) ● The feature can also erase the shadow that appears down the center of books and other originals that open up. (CENTER ERASE) ● The factory default setting for the width of the erasure is approximately 1/2". The width can be changed in the user programs. (p.45) EDGE ERASE AA EDGE + CENTER ERASE Original CENTER ERASE Copy AB AB AB AB Original Copy 3 Original Copy Note • Center erase cannot be used in combination with dual page copy. • Erase copy cannot be used in combination with 2 IN 1 / 4 IN 1 copy. (p.34) • Erase copy cannot be used when the paper is a special size or copying from the bypass tray. • Note that if the width of the erasure is too large, the edge of the image may be partially erased. 1 Place the original(s). (p.18) 2 If the original is placed on the document glass, select the original size. (p.18) When using the SPF/RSPF, make sure that the same ORIGINAL SIZE indicator as your original size lights up. 3 Press the [ERASE] key to select the desired erase mode. To select the "EDGE + EDGE ERASE CENTER CENTER ERASE" mode, press the [ERASE] key until both the EDGE and CENTER indicators light up. 4 Set the number of copies and other settings, and then press the [START] key ( ). The copy is delivered to the paper output tray. Note • To cancel erase copy, press the [ERASE] key repeatedly until the ERASE indicators are both off. • If the original size was not selected in step 2, erase copy cannot be used. 37