Sharp AX1200S RK-12S30 Installation Instructions - Page 6

STEP 5: INSTALLATION OF REAR SPACER and EXHAUST DUCT UPPER 1 Attach RECTIFIER PLATE L to inside of EXHAUST DUCT UPPER with 4 SCREWS (A) as shown in Figure 5-A. 2 Place EXHAUST DUCT UPPER over the oven and EXHAUST DUCT BACK, and attach REAR SPACER with 2 SCREWS (A) in Figure 5-B. 3 Tighten together EXHAUST DUCT UPPER and EXHAUST DUCT BACK at the left and right sides with 2 SCREWS (A) as shown in Figure 5-B. REAR SPACER EXHAUST DUCT UPPER RECTIFIER PLATE L SCREW (A) SCREW (A) SCREW (A) EXHAUST DUCT UPPER SCREW (A) Figure 5-A EXHAUST DUCT BACK Figure 5-B STEP 6: INSTALLATION OF EXHAUST DUCT LEFT 1 Attach EXHAUST DUCT LEFT to the left wall of the oven. 2 Tighen with 6 screws (A) as shown in Figure 6. EXHAUST DUCT UPPER SCREW (A) EXHAUST DUCT LEFT Figure 6 6 DIVIDE PLATE L SCREW (A)