Sharp BD-AMS20U BD-AMS10U BD-AMS20U Operation Manual - Page 57
Software Update Settings, Auto Update from Network - firmware update
View all Sharp BD-AMS20U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
SETTINGS Software Update Settings In this player, the software version can be updated using either one of the following methods. • Auto Update from Network • Manual Update from Network • Manual Update from USB memory device Auto Update from Network This function allows you to perform the update by accessing an Internet connection automatically to check if there is a new firmware version every time the player is turned on. When using this function, it is required to perform the following settings in advance. NOTE • Make sure that the LAN cable or the wireless LAN adapter is connected to this player and make sure that the wireless router/access point is connected to the Internet if using the wireless LAN adapter. (See pages 19-20.) • Make sure to perform the communication settings. (See pages 50-53.) • It may take time to access and download the update depending on the Internet connection and other factors. CAUTION • Do not remove the LAN cable or the wireless LAN adapter or unplug the AC cord while downloading or updating software. Setup 1 Press c/d to select "Settings", then press b or ENTER. 2 Press c/d to select "Software Update Settings", then press b or ENTER. 3 Press a/b to select "Auto Update Setting", then press d or ENTER. 4 Press a/b to select "Yes", then press ENTER. • After this, an Internet connection will be made automatically every time this player is turned on. Update process 1 When this player is turned on, the Internet connection starts automatically. • "Accessing..." blinks on the screen. • The current version of this unit software and the latest version of the update file on the network are displayed when latest version of firmware has been found. To update this player software with update file, select "Yes", and go to step 2. Latest version of firmware has been found. Firmware update is available. Proceed with update? Current Version : xxxxxxxxxx Latest Version : yyyyyyyyyy If "Yes" will be selected, version update will start. Yes No • If the latest firmware version has been already updated, nothing is displayed on the screen. 2 Press ENTER to start updating. Downloading latest firmware... Version : yyyyyyyyyy 30% 3 When the software is successfully updated, a screen is displayed indicating that the update process is completed. • If the update has failed, an error message appears. Retry the update after checking if the broadband Internet connection (pages 19-20) and communication settings (pages 50-53) are performed properly. 4 Press POWER to turn off the player before using again. Settings 55