Sharp BD-HP24U BD-HP24U Operation Manual - Page 39

Playback Functions Switching the Angle BD VIDEO DVD VIDEO If multiple angles are recorded, you can switch between them. 1 Press FUNCTION during playback. • The Function Control screen is displayed on the TV. 2 Press a/b to select the Angle Number column, then press ENTER. BD-VIDEO 1/3 5 / 25 00 : 20 : 30 2 English 1 1 5.1ch Off Displaying the Angle Mark BD VIDEO DVD VIDEO You can change settings so that Angle Mark appears in the right bottom part of the screen when multiple angles are recorded. The settings can be changed in "Settings" - "Playback Setting" - "Angle Mark Display" (Page 43). 3 Press a/b to select the desired Angle Number, then press ENTER. • "-" is displayed if a disc is recorded with only one angle. 4 Press n RETURN or FUNCTION to close the Function Control screen. NOTE • The displayed items vary depending on the disc. • If you access the Function Control screen during playback of a BD/DVD video, it may be impossible to operate the BD/DVD video playback. In cases like this, close the Function Control screen. • The operation of angles differs according to each disc. You may need to refer to the operation manual of the disc. • The display for angle information automatically disappears after 5 seconds. Playback 37