Sharp BD-HP24U BD-HP24U Operation Manual - Page 47
ENTER, Settings
![]() |
UPC - 074000354982
View all Sharp BD-HP24U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
SETTINGS 5 For setting the IP address, press c/d to select "Yes" or "No", then press ENTER. Do you obtain the IP address automatically? Yes No IP Address Netmask Gateway Next • If selecting "Yes": The IP address is automatically obtained. • If selecting "No": The IP address, netmask and gateway are manually entered using the screen for inputting characters. (See page 46.) Regarding each of the setup values, confirm the specifications of your broadband router. 6 Select "Next", then press ENTER. • If selecting "Yes" in the step 5, go to the step 9. 7 Enter your DNS address. Enter your DNS address. Primary Secondary Next • The primary and secondary DNS addresses are entered using the screen for inputting characters. (See page 46.) Regarding each of the setup values, confirm the specifications of your broadband router. 8 Select "Next", then press ENTER. 9 For setting the proxy server, press c/d to select "Yes" or "No", then press ENTER. Do you use the proxy server? Yes No Address Port Next • If selecting "Yes": The IP address or proxy server name and port number for the proxy server specified from your internet service provider are entered using the screen for inputting characters. (See page 46.) • If selecting "No": Go to the next step. 10 Select "Next", then press ENTER. 11 For the advanced setting (the setting of the Ethernet connection speeds), press a/b to select "Yes" or "No", then press ENTER. • Normally select "No", then press ENTER. • The Ethernet connection speeds can be set when you select "Yes", then press ENTER. • As automatic detection is made (factory preset mode), this setting is not normally necessary. If a situation occurs in which the Ethernet connection fails, etc., change the setting and confirm if the Ethernet connection successfully works. When the connection speed is set, select "Next", then press ENTER. Option Ethernet Connection Speeds Auto-Detection 10M Half Duplex 10M Full Duplex 100M Half Duplex 100M Full Duplex Next 12 For testing the connection to the internet, after confirming the settings, press a/b to select "Test", then press ENTER. • "Test" is available only when setting to obtain the IP address automatically. "Test" cannot be selected if the IP address has not been obtained automatically. Confirm the current setting. IP Address : xxx xxx xxx xxx Netmask : xxx xxx xxx xxx Gateway : xxx xxx xxx xxx DNS Address : xxx xxx xxx xxx MAC Address : xx:xx:xx:xx:xx:xx Test Complete • As a result of the test, if the internet connection fails, enter the setup values manually. 13 Press a/b to select "Complete", then press ENTER. Settings 45
![](/manual_guide/products/sharp-bdhp24u-bdhp24u-operation-manual-161e358/47.png)