Sharp BD HP52U BD-HP52U Operation Manual - Page 50
Manual Update from USB memory, device
UPC - 074000354869
View all Sharp BD HP52U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
SETTINGS Manual Update from USB memory device This function allows software updates by inserting a USB memory device with the update file into the BD STORAGE/SERVICE terminal on this player. • When a software update is performed, the software update data must be written onto the USB memory device in advance using a PC. • The USB memory device must be clear of all files except software update data to allow new software uploading. To check for the availability of a software update, visit www.sharpusa.com/products/support/. If you have any questions, please call 1-800-BESHARP (800-237-4277). • When software update data is released, copy the data onto a USB memory device after downloading it to a PC. • For methods such as downloading and copying to a USB memory device, carefully read the description shown on the website before performing the operation. NOTE • Only USB memory devices formatted with FAT 32/16 are compatible. When formatting a USB memory device using a PC, perform the following settings. Format File System: FAT32 Allocation Unit Size: Default Allocation Size • Do not extract the firmware update file to any folders other than the root directory on the USB memory device. The firmware update file must be only one file directly in the root directory. CAUTION • Do not remove the USB memory device or unplug the AC cord while the software is being updated. 1 Insert the USB memory device with the update file into the BD STORAGE/SERVICE terminal on rear of this player. USB memory device 2 Press SETUP to display the Menu screen. 3 Press a/b to select "Settings", then press d or ENTER. 4 Press a/b to select "Software Update Settings", then press d or ENTER. 5 Press a/b to select "Manual Update", then press d or ENTER. 6 Press a/b to select "USB Memory", then press ENTER. • If you have not yet set the password, go to step 8. 7 Enter the 4-digit number using 0-9. Enter 4-digit password 8 Press ENTER to start checking data in the USB memory device. Insert USB memory device containing the software update file. OK 9 During the data checking, "Checking" blinks. Now checking the data in USB memory device. Checking 48