Sharp BDHP70 BD-HP70U Operation Manual - Page 31

Video/Picture/Music Playback Enjoying BONUSVIEW or BD-LIVE BD VIDEO This Player is compatible with additional functions of BD-Video, BONUSVIEW (BD-ROM Profile 1 Version 1.1) and BD-LIVE. For BD-Video discs compatible with BONUSVIEW, the functions of Picture in Picture and Virtual Package are available. For BD-LIVE compatible discs, you can enjoy a variety of functions via the Internet in addition to the BONUSVIEW functions. Virtual Package/BD-LIVE data is saved in Local Storage (USB memory device connected to this Player). To enjoy these functions, connect a USB memory device (2GB or greater) supporting USB 2.0 High Speed (480Mbit/s) to the USB1 or USB2 terminal on this player. • When the wireless LAN adapter is not inserted into the USB1 terminal on the rear of the player, it is recommended that the USB memory device be connected to the USB1 terminal. (When you insert or remove a USB memory device, be sure to turn the main power off and make sure that "Quick Start" is set to "No" (See page 51).) NOTE • A USB memory device can be used with either the USB1 or USB2 terminal. When two USB memory devices are connected to both terminals at the same time, in certain situations the USB1 terminal may give priority to Local Storage and the USB2 terminal cannot be used for Local Storage. NOTE • SHARP cannot guarantee that all brands' USB memory devices will operate with this player. • Only USB memory devices formatted with FAT 32/16 are compatible. When formatting a USB memory device using a PC, perform the following settings. Format File System: FAT32 Allocation Unit Size: Default Allocation Size • Do not use a USB extension cable when connecting a USB memory device to the USB1 or USB2 terminal of the player. − Using a USB extension cable may prevent the player from performing correctly. Use of Picture in Picture function (secondary audio/video playback) BD-Video that includes secondary audio and video compatible with Picture in Picture can be played back with secondary audio and video simultaneously as a small video in the corner. 1 Press PinP during playback to show the 2- picture screen. Rear USB memory device • If there is insufficient storage space, the data will not be copied/downloaded. Delete unneeded data or use a new USB memory device. • If a USB memory device containing other data (previously recorded) is used, the video and audio may not play back properly. • If the USB memory device is disconnected from this player during playback of Virtual Package/BD-LIVE data, playback of the disc will stop. • Some time may be required for the data to load (read/write). • Refer to "USB Memory Management" on page 57 for erasing the Virtual Package data and the BD-LIVE data in the USB memory device. Primary audio/video Secondary audio/video 2 To remove the secondary video, press PinP again. NOTE • To listen to secondary audio, make sure that "Secondary Audio" is set to "On". (See page 50.) • The secondary audio and video for Picture In Picture may automatically play back and be removed depending on the content. Also, playable areas may be restricted. Virtual Package For BD-Video discs compatible with Virtual Package, data is copied from the discs or Internet to local storage. It is automatically copied to the local storage prior to playback. You can enjoy a variety of additional functions including secondary video, secondary audio, subtitles, movie trailers, etc. • The playback methods vary depending on the disc. For details, refer to the disc manual. Playback (Continued on the next page) 29