Sharp CD-BA200 CD-BA200 Operation Manual - Page 17
Maintenance, Specifications - parts
View all Sharp CD-BA200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
MAINTENANCE TAPE 1 TAPE 2 s Internal care q Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol. q After long use, the deck's heads and capstans may become magnetized, causing poor sound. Demagnetize these parts once every 30 hours of playing/recording time by using a commercial tape head demagnetizer. Read the demagnetizer's instructions carefully before use. q In order to ensure proper operation of the CD player, preventative maintenance (cleaning of the Laser Pick-up lens) should be performed periodically in order to keep the lens dust-free. Lens cleaners are commercially available. Contact your local CD software dealer for options. s External care q Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then wipe with a dry cloth. q Do not use chemically treated cleaning cloths or other chemicals. SPECIFICATIONS As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. q General Power source: Power consumption: Dimensions: Weight: AC 120 V, 60 Hz 185 W Width; 10-5/8" (270 mm) Height; 13" (330 mm) Depth; 14" (355 mm) 19.2 lbs. (8.7 kg) q Amplifier section Output power: Output terminals: Input terminals: 100 watts minimum RMS per channel into 6 ohms from 60 Hz to 20 kHz, 10 % total harmonic distortion Speakers; 6 ohms Headphones; 16-50 ohms (recommended; 32 ohms) Video/Auxiliary (audio signal); 500 mV/47 kohms q Cassette deck section Frequency response: Signal/noise ratio: Wow and flutter: 50-14,000 Hz (Normal tape) 55 dB (TAPE 1, playback) 50 dB (TAPE 2, recording/playback) 0.3 % (WRMS) q Speaker section Type: 4-way type [5-1/4" (13 cm) sub woofer, 5-1/4" (13 cm) woofer, 2" (5 cm) tweeter and super tweeter] Maximum input power (Total): 200 W Rated input power (Total): 100 W Impedance: 6 ohms Dimensions: Width; 10-5/8" (270 mm) Height; 13" (330 mm) Depth; 10-3/8" (264.6 mm) Weight: 10.3 lbs. (4.7 kg)/each q Compact disc player section Type: Signal readout: D/A converter: Frequency response: Dynamic range: 3-disc multi-play compact disc player Non-contact, 3-beam semiconductor laser pickup 1-bit D/A converter 20 - 20,000 Hz 90 dB (1 kHz) q Tuner section Frequency range: FM; 87.5-108 MHz AM; 530-1,720 kHz 16