Sharp CD-SW200 CD-SW200 Operation Manual - Page 22

CD-SW200 Advanced CD or MP3/WMA disc playback (continued) Repeat play Repeat play can play all 5 discs, all tracks on a chosen disc, or a programmed sequence continuously. To repeat all tracks on up to 5 discs: Press the / button twice. Random play The tracks on the disc(s) can be played in random order automatically. To random play all tracks on up to 5 discs: Press the RANDOM button on the remote control. To repeat desired tracks: Perform steps 1 - 6 in "Programmed play" section on page 23 and then press the / button twice. CD or MP3/WMA disc Playback To cancel repeat play: Press the / button again. " " will go out. To repeat all tracks on the chosen disc: 1 Press one of the 1 - 5 buttons. 2 Within 5 seconds, press the DIRECT PLAY button twice. To cancel repeat play: Press the DIRECT PLAY button again. " " will go out. 22 To cancel random play: Press the / button. "R" will go out. To random play all tracks on the chosen disc: 1 Press one of the 1 - 5 buttons. 2 Within 5 seconds, press the DIRECT PLAY button. 3 Press the RANDOM button on the remote control. To cancel random play: Press the DIRECT PLAY button. "R" will go out. Notes: If you press the button during random play, you can move to the next track by the random operation. On the other hand, the button does not allow you to move to the previous track. The beginning of the track being played will be located. In random play, the unit will select and play tracks automatically. (You cannot select the order of the tracks.) Caution: After performing repeat or random play, be sure to press the (CD ) button. Otherwise, the disc(s) will play continuously.