Sharp CD-SW200 CD-SW200 Operation Manual - Page 32
Tape Recording
UPC - 074000368057
View all Sharp CD-SW200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Tape Recording CD-SW200 Recording on a cassette tape (continued) Recording from a CD or MP3/WMA disc You can record the desired disc using the DIRECT PLAY button. 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD button. 3 Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you. Wind past the leader of the tape, on which recording cannot be performed. 4 Press the button. Recording will be paused. 5 Press one of the 1 - 5 buttons to select the desired disc. 6 Within 5 seconds, press the DIRECT PLAY button to start recording. Recording is started from the selected disc. When the playback of the last track is finished or the end of the tape is reached, the disc and the cassette will stop automatically. Playback of the disc will start approximately 7 seconds after the tape starts. To stop recording: Press the (TAPE ) button. The disc and tape will stop. 32