Sharp DK-A10P DK-A10P Operation Manual - Page 13

General control Volume control Main unit and remote control operation: Press the VOL (+ or -) button to increase or decrease the volume. 0 ..... 30 MAXIMUM DK-A10P DK-A10P (BK) E SOUND control When the E SOUND/DEMO button is pressed, the current mode setting will be displayed. To change the setting, press the E SOUND/ DEMO button repeatedly to toggle ON or OFF. When ON is selected, the unit will enter the E SOUND mode and adjust low bass and high frequency automatically according to volume input. Basic Operation Equalizer When the EQ button is pressed, the current mode setting will be displayed. To change to a different mode, press the EQ button repeatedly until the desired sound mode appears. To turn the power on Press the ON/STAND-BY button to turn the power on. Lights on the snooze button, subwoofer and around the disc slot will light up. Note: iPod dock door will automatically open when the power is on. After use: Press the ON/STAND-BY button to enter the power stand-by mode or demonstration mode. FLAT ROCK CLASSICS POPS VOCAL JAZZ No equalization. For rock music. For classical music. For pop music. Vocals are enhanced. For jazz. Illumination light control Press the SNOOZE/DIMMER button to adjust the brightness of the display and illumination light. IIIumination light and display bright IIIumination light and display dim Function When the FUNCTION button on remote control is pressed, the current function will change to different mode, press the FUNCTION button repeatedly to select desired function. iPod Tuner FM ST Tuner FM mono CD AUX AM IIIumination light off and display gets dimmer Note: Volume auto fade-in The backup function will protect the memorized function mode for a few days should there be a power failure or the AC power cord If you turn off and on the main unit with the volume set to 27 or becomes disconnected. higher, the volume starts at 16 and fades in to the last set level. 13