Sharp DK-A10P DK-A10P Operation Manual - Page 27

DK-A10P DK-A10P (BK) Snooze function Once timer has started, pressing the SNOOZE/DIMMER button will stop alarm for 5 minutes. Once the snooze time has expired, alarm will continue. To turn off the alarm function During alarm or snooze, press the ALARM ON/OFF button to turn it off. Sleep operation The radio, compact disc and iPod can be turned off automatically. 1 Playback the desired sound source. 2 Press the SLEEP button to select sleep time. To confirm the remaining sleep time: 1 While "SLEEP" is indicated, press the SLEEP button on the remote control once to select "SLEEP XXX". "XXX" is sleep remaining time. The remaining sleep time is displayed for about 10 seconds. You can change the remaining sleep time while it is displayed by pressing the SLEEP button (steps 2 - 3). To cancel the sleep operation: Press the ON/STAND-BY button while "SLEEP" is indicated. To cancel the sleep operation without setting the unit to the stand-by mode, proceed as follows. 1 While "SLEEP" is indicated, press the SLEEP button to select "SLEEP OFF", and press the MEMORY button. To use alarm and sleep operation together Sleep and alarm: For example, you can fall asleep listening to the radio and wake up to iPod in the next morning. 1 Set the sleep time (see left, steps 1 - 4). 2 While the sleep timer is set, set the alarm (steps 1 - 6, page 26). 3 Activate the alarm (see page 26). Advanced Features Sleep timer setting Alarm setting End time 3 Press the MEMORY button. "SLEEP" will appear. 4 The unit will enter the clock function automatically after the preset time has elapsed. The volume will be turned down 1 minute before the sleep operation finishes. 10 minutes - 2 hours Sleep operation will automatically stop 30 minutes Alarm start time 27