Sharp DK-CL3P DK-CL3P Operation Manual - Page 19

Advanced Features/Reference ■ Listening to the audio/video sounds from portable audio player, computer etc. 1 Use the auxiliary cable to connect the portable audio player, computer etc. to the AUDIO IN jack. When using video equipment, connect the audio output to this unit and the video output to a television. 2 Press the ON/STAND-BY button to turn the power on. 3 Press the FUNCTION button to select AUX function. 4 Play the connected equipment. Note: To prevent noise interference, place the unit away from the television and do not make any auxilary playback while listening to the iPod or iPhone. Troubleshooting chart DK-CL3P Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center. ENGLISH ■ General Symptom ● The clock is not set to the correct time. ● When a button is pressed, the unit does not respond. ● No sound is heard. Possible cause ● Did a power failure occur? Reset the clock. (Refer to page 11) ● Set the unit to the power stand-by mode and then turn it back on. ● If the unit still malfunctions, reset it. (Refer to page 19) ● Is the volume level set to "0"? ■ Tuner Symptom ● The radio makes unusual noises continuously. Possible cause ● Is the unit placed near the TV or computer? ● Is the FM antenna placed properly? Move the antenna away from the AC/DC adaptor if it is located nearby. E-18