Sharp DK-CL3P DK-CL3P Operation Manual - Page 20

References DK-CL3P ENGLISH Troubleshooting chart (continued) ■ iPod and iPhone Symptom Possible cause ● No sound is produced. No image appears on the TV/monitor. ● iPod or iPhone will not charge. ● The iPod or iPhone unit software version is not update to the latest version. Please visit Apple's homepage. ● The iPod or iPhone is not playing. ● The iPod or iPhone is not properly connected to the unit. ● Is the AC/DC adaptor of the unit plugged in? ● The video cable is not properly connected. ● The TV/monitor's input selection is not properly set. ● The iPod or iPhone is not making full contact with the connector. ● Is the AC/DC adaptor of the unit plugged in? ● Using iPod (3rd generation). ● The main unit is using batteries as power supply. ● The iPod or iPhone is not compatible. Refer page 12 for compatible models. ● "This accessory is not made to work with iPhone" or similar appears on iPhone screen. ● The iPhone battery is low. Please charge the iPhone. ● iPhone not properly docked. E-19 ■ Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave the power on until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit. ■ If problem occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again. 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on. Note: If neither operation above restores the unit, remove the backup batteries. ■ Clearing all the memory (reset) During standby mode, press and hold SNOOZE button for 5 seconds. Display will become blank for awhile and main unit will reset. Caution: This operation will erase all data stored in memory including clock, alarm settings and tuner preset. ■ Before transporting the unit Remove the iPod or iPhone from the unit. Then, set the unit to the power standby mode. Carrying the unit with iPod or iPhone left docked might damage both systems.