Sharp DT 200 DT200 Operation Manual - Page 21
Placement of the Projected Image Using the Keystone Correction
UPC - 074000358607
View all Sharp DT 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Setup & Connections Placement of the Projected Image Using the Keystone Correction : Screen area Place the projector at a distance from the screen that allows images to be projected onto the screen by referring to "Adjusting the Projection Distance" on pages 21 and 22. 1 Project the test pattern of the Keystone correction function onto the screen. Rotate the Focus ring until the image on the screen becomes clear. (See page 16.) 2 Change the projection angle using the Swivel Stand to properly project images onto the screen. (See page 17). 3 Align the edge of the screen closest to the projector with the test pattern by adjusting the zoom and the Swivel Stand. (See pages 16 and 17.) 4 Adjust the Keystone function so that the size of the projected image matches the screen size. (See page 19.) DT-200(E)#p15_21.p65 20 5 Align the image on the screen by adjusting the zoom function and the Swivel Stand. 6 Adjust the focus so that the projected image is in focus at the center of the screen. (See page 16.) • The aspect ratio of the projected image shifts slightly when the lens shift is at a position other than the top position. • The aspect ratio of the projected image also shifts slightly when the "H Keystone" and "V Keystone" functions are adjusted simultaneously. E-20 02.11.21, 11:31 AM