Sharp DT 200 DT200 Operation Manual - Page 47
Removing and installing the lamp unit
UPC - 074000358607
View all Sharp DT 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Replacing the Lamp Removing and installing the lamp unit CAUTION • Be sure to remove the lamp cage by the handle. Do not touch the glass surface of the lamp cage or the inside of the projector. • To avoid injury to yourself and damage to the lamp, carefully follow the steps below. • Replace the lamp after turning off the power and unplugging the power cord. 1 Turn off the power. 2 3 Unplug the power cord. Remove the Swivel Stand. (See page 17.) Press POWER OFF. Wait until the cooling fan stops running. DT-200 4 5 Loosen the user service screw that secures the Slide the lamp cage cover in the direction lamp cage cover. of the arrow. 6 Loosen and remove the three-securing screws from the lamp cage. User service screws 7 8 9 Remove the lamp cage. Insert the new lamp cage firmly into the lamp cage Tighten the threesecuring screws to compartment. fasten the lamp cage. Maintenance & Troubleshooting DT-200(E)#p46_47.p65 46 02.11.21, 11:46 AM E-46