Sharp DT-200L Operation Manual - Page 18
Using the Swivel Stand
View all Sharp DT-200L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Setting Up the Screen Using the Swivel Stand 1 You can adjust the angle and direction of the projected image by using the Swivel Stand. 1 Unlock the lever on the Swivel Stand. 2 Adjust the angle and direction of the projected image as you want by lifting up the projector and rotating the projector on the Swivel 2 Stand. 3 Lock the lever on the Swivel Stand. Adjustable up to ± 10° from the standard position. Setup & Connections Adjustable up to ± 25° from the standard position. Adjustable up to 3 ± 3° from the standard position. E-17 DT-200(E)#p15_21.p65 2 1 Removing the Swivel Stand Lift the projector (2) with pressing the removing-stand button on the back of the projector (1). Attaching the Swivel Stand Align the tabs on the front bottom of the projector (1). While holding down the button (2), place the projector onto the Swivel Stand (3) to attach. Removingstand button Press the projector down firmly to attach it to the Swivel Stand to make sure it is securely attached to the Swivel Stand. 1 3 2 CAUTION • Do not hold the lens when lifting, lowering or rotating the projector. • When lowering the projector, be careful not to get your fingers caught in the area between the Swivel Stand and the projector. • When the height or direction of the projector is adjusted, the image may become distorted (keystoned), depending on the relative positions of the projector and the screen. See page 19 for details on the keystone correction. 17 02.11.21, 11:30 AM