Sharp DT-200L Operation Manual - Page 38
Selecting a Background Image, Setting the Video Signal VIDEO menu only
View all Sharp DT-200L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Setting the Video Signal (VIDEO menu only) 2,3,4 1, 6 5 On-screen Display The video input system mode is preset to "Auto"; however, it can be changed to a specific system mode if the selected system mode is not compatible with the connected audiovisual equipment. 1 Press MENU. The "Picture" menu screen appears. 2 Press / to display the "Options" menu screen. 3 Press / to select "Video Systems", and then press . 4 Press / to select the desired video system mode. 5 Press ENTER to save the setting. 6 To exit the menu screen, press MENU. • When the system mode is set to "Auto", you may not receive a clear picture due to signal differences. Should this occur, switch to the video system of the source signal. • "Auto" cannot be set for PAL-M and PAL-N input signals. Select "PAL-M" or "PAL-N" in "Video Systems" menu for PAL-M and PAL-N input signals. Selecting a Background Image 2,3,4 1, 5 On-screen Display This function allows you to select the image displayed when no signal is being sent to the projector. Description of Background Images Selected item Blue ( ) None ( ) Description Blue screen Black screen 1 Press MENU. The "Picture" menu screen appears. 2 Press / to display the "Options" menu screen. 3 Press / to select "Background". 4 Press / to select the background image you want to display on the screen. 5 To exit the menu screen, press MENU. Basic Operation E-37 DT-200(E)#p36_40.p65 37 02.11.21, 11:42 AM