Sharp DV-NC70U Service Manual - Page 32
Replacement Of Drum D.d. Motor, 20 Replacement Of The Capstan D.d., Direct Drive Motor
![]() |
View all Sharp DV-NC70U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
DV-NC70U/C DV-NC72U 8-20 REPLACEMENT OF THE CAPSTAN D.D. (DIRECT DRIVE) MOTOR • Remove the mechanism from the set. • Removal (Follow the order of indicated numbers.) 1. Unsolder loading motor wire and drum FFC. 2. Remove the reel belt 1. 3. Remove the three screws 2. 2 Capstan D.D. motor Main chassis Solder loading motor wire Solder drum FFC 1 Reel belt Figure 8-33. • Reassembly 1. Taking care so that the capstan shaft does not contact the mechanism chassis, set its position on the mechanism chassis, and then install with the three screws 2. 2. Install the reel belt. 3. Solder loading motor wire and drum FFC. Notes: 1. After installing the capstan D.D. motor, be sure to rotate the capstan D.D. motor and check the movement. 2. Set the tape, and check for the tape crease near the reverse guide in the playback mode. Adjust the A/C head and azimuth as stated in 8-19 item 2. 8-21 REPLACEMENT OF DRUM D.D. MOTOR 1. Set the ejection mode. 2. Withdraw the main power plug from the socket. • Removal (Perform in numerical order.) 1. Disconnect the FFC cable 1. 2. Unscrew the Drum D.D. stator assembly fixing screws 2. 3. Take out the Drum D.D. stator assembly 3. 4. Unscrew the Drum D.D. rotor assembly fixing screws 4. 5. Take out the Drum D.D. rotor assembly 5. Notes: 1. In removing the Drum D.D. stator assembly, part of the drum earth spring pops out of the pre-load collar. Be careful not to lose it. 2. Install, so that the Drum D.D. rotor ass'y and upper drum ass'y mounting direction check holes align. (Align the upper drum dent with the rotor hole.) 3. Be careful not to damage the upper drum or the video head. 4. Protect the hole elements from shock due to contact with Drum D.D. stator or Drum D.D. rotor ass'y. 5. After installation adjust the playback switching point for adjustment of servo circuit. 2 3 Drum D.D.stator ass'y 1 4 4 FFC 5 Drum D.D. rotor ass'y Upper drum Figure 8-34. 32
![](/manual_guide/products/sharp-dvnc70u-service-manual-8d0c628/32.png)