Sharp DV-R550U Operation Manual - Page 34
One-touch Timer Recording
![]() |
View all Sharp DV-R550U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Recording One-touch Timer Recording This is a simple way to set the recording time in blocks of 30 minutes. Check that the disc has enough recordable space for the time you set. After finishing the recording, the recorder automatically goes into standby. press DVD first. 1 Turn on the unit and load a recordable disc. Make sure that the TV input is set on the unit. This operation may take a while to be recognized. 2 Select a recording speed using REC MODE. Refer to "Recording speed" on page 26. 3 Make sure that the recording format is set to the desired mode. Refer to "Formatting a disc" on pages 28-29. When a DVD-RW disc is loaded: You can choose Video mode or VR mode from the setting menu. The default is "VR mode". Refer to "Choosing the recording format of a blank disc" on page 28. When a DVD-R disc is loaded: DVD-R discs will always be in Video mode. 4 Select a desired channel to record using CH K / L or the Number buttons. 5 Press REC/OTR, then press REC/OTR repeatedly to select a desired recording time. Recording time appears on the TV screen (30 minutes to 8 hours). Recording will start. I 0:30 0:30 (Normal Recording) 1:00 8:00 7:30 When the unit reaches the specified time, it will be turned off automatically. To change the recording time during the One-touch Timer Recording, press REC/OTR repeatedly until the desired time appear. To cancel the One-touch Timer Recording within the specified time, press STOP C. This operation may take a while to be completed. 4 5 2 Note • The remaining recording time will appear on the display panel during an Onetouch Timer Recording. Press DISPLAY to see it on the TV screen. • You cannot pause a Onetouch Timer Recording. • Unlike a Timer Recording, you can perform the following operations during a Onetouch Timer Recording. - Turning off the power. - Using REC/OTR, STOP C. • The unit will be turned off automatically under the following conditions. 1) No space remained on the disc. 2) When a power failure occurs. • If OTR is finished in DVD during playback or REC mode in VCR, the DVD will be in stop mode and the VCR keeps the current mode. • When OTR is finished and the power is turned off, the unit will switch to the standby mode automatically if a Timer Recording has been programmed. Press T-SET to cancel the standby mode for using the unit continuously. 34
![](/manual_guide/products/sharp-dvrw550u-operation-manual-82bea2d/34.png)