Sharp DX-C311 DX-C311 DX-C401 Operation Manual - Page 451
Changing the format Internet fax mode
View all Sharp DX-C311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 451 highlights
SCANNER/INTERNET FAX Changing the format (Internet fax mode) The file format for sending an Internet fax is normally set to [TIFF-F]. If the destination Internet fax machine does not support full mode (it only supports simple mode), follow the steps below to select [TIFF-S]. Switch to Internet fax mode and display the file format settings screen. 1 (1) Touch the [Internet Fax] tab. (2) Touch the [File Format] key. ☞ IMAGE SETTINGS (page 5-49) (1) (2) Internet Fax/File Format OK 2 File Type TIFF-S TIFF-F Compression Mode MH (G3) MMR (G4) Select the file format. (1) Touch the key of the desired format. If you selected [TIFF-F], select the compression mode. (2) Touch the [OK] key. When [TIFF-S] is selected, the transmission settings are restricted as follows: • Resolution: The selections are [200X100dpi] and [200X200dpi]. If [TIFF-S] is selected after [200X400dpi], [400X400dpi] or [600X600dpi] is selected, the resolution automatically changes to [200X200dpi]. • Send size: Always 8-1/2" x 11" (A4) in landscape orientation. If [TIFF-S] is selected after the send size is changed, the send size is automatically changed to 8-1/2" x 11" (A4) in landscape orientation. If a size larger than 8-1/2" x 11" (A4) is scanned, the size will automatically be reduced to 8-1/2" x 11" (A4) in landscape orientation. When this format is included in a broadcast transmission, the image will be transmitted to all destinations at 8-1/2" x 11" (A4) in landscape orientation. • Special modes: When a ratio setting is selected and the original size is entered, Card Shot cannot be used. System Settings (Administrator): Compression Setting This is used to set the default compression mode for Internet fax transmission. 5-63 Contents