Sharp DX-C311FX DX-C311 DX-C401 Operation Manual - Page 368
Polling Memory Transmission Using, F-codes
View all Sharp DX-C311FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 368 highlights
FACSIMILE POLLING MEMORY TRANSMISSION USING F-CODES When your machine receives a transmission request from another machine, this function sends a fax stored in a F-code memory box (polling memory) in your machine to that machine. The other machine must correctly specify the F-code configured in your machine or transmission will not take place. The document to be transmitted must be scanned into a F-code polling memory box. The other machine Transmission request (polling) using an F-code Sub-address: AAAAAAAA Passcode: XXXXXXXX The machine F-code polling memory box Transmission Box name: Sub-address: Passcode: BBBB AAAAAAAA XXXXXXXX System Settings: F-Code Memory Box (page 7-97) This is used to create memory boxes (polling memory) for F-code polling memory transmission. A memory box name, sub-address, and passcode are programmed in each box. SCANNING A DOCUMENT INTO A MEMORY BOX FOR F-CODE POLLING TRANSMISSION Follow these steps to scan a document into a memory box (polling memory) for F-code polling transmission. Place the original. 1 Place the original face up in the document feeder tray, or face down on the document glass. When the original is a different size than the size setting, set the original size. ☞ SPECIFYING THE SCAN SIZE AND SEND SIZE (page 4-45) Select the special modes. (1) Touch the [Special Modes] key. 2 (2) Touch the keys to switch through the screens. (3) Touch the [Memory Box] key. ☞ SPECIAL MODES (page 4-64) 4-100 Contents