Sharp DX-C311FX DX-C311 DX-C401 Operation Manual - Page 609
Operation Settings
View all Sharp DX-C311FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 609 highlights
SYSTEM SETTINGS Operation Settings Settings related to machine operation can be configured. Touch the [Operation Settings] key to configure the settings. Other Settings Keys Touch Sound This setting is used to adjust (or turn off) the volume of the beep that sounds when you touch a key. You can also have three beeps sound at initial values when setting the ratio in copy mode or when adjusting the exposure in any mode. Screen in which setting is effective Ratio setting screen in base screen of copy mode Exposure adjustment screen in base screen of copy mode Exposure adjustment screen in base screen of fax, Internet fax, and network scanner modes Exposure adjustment screen for Scan to HDD in document filing mode Initial value Ratio 100% Exposure level: 3 (medium) Auto Clear Setting The time until Auto Clear activates can be set to any number of minutes from 10 to 240. If the machine is not used for the duration of time set here, the auto clear function will clear any settings that have been selected and return the screen to the base screen of copy mode or the job status screen. Cancel Auto Clear Timer This is used to disable the auto clear function. Message Time Setting The duration of time that messages appear in the touch panel (the time until a message is automatically cleared) can be set to any number of seconds from 1 to 12. MFP Display Language Setting The language that appears in the touch panel can be changed. When user authentication is enabled and a display language is specified in the favorite operation group, that setting is given priority. Disabling of Bypass Printing This is used to disable bypass printing (printing other jobs ahead of a job that has been stopped* because the paper required for the job is not in any of the trays). * This does not include cases where the paper ran out during the job. Key Operation Setting This setting determines how long a key in the touch panel must be touched until the key input is registered. The time can be set from 0 to 2 seconds in increments of 0.5 seconds. By lengthening the time setting, key input can be prevented when a key is touched accidentally. Keep in mind, however, that when a longer setting is selected more care is required when touching keys to ensure that key input is registered. Disable Auto Key Repeat This is used to disable key repeat. Key repeat causes a setting to change continuously while a key is touched, not only each time the key is touched. Disabling of Clock Adjustment This setting is used to prohibit changing of the date and time. Business Card Scan Option When this setting is enabled, "Business Card Scan" can be used in the special modes for copying and scanning. Disabling of Job Priority Operation This disables the job priority function and hides the [Priority] key in the job status screen. 7-58 Contents