Sharp EA242WU User Manual MultiSyncr - Page 42

COLOR COLOR Menu Color Control System 1, 2, 3, 4, 5 NATIVE L/B (LOW BLUE LIGHT) DICOM SIM. PROGRAMMABLE TOOLS TOOLS Menu VOLUME VIDEO DETECT FIRST NONE DP OUT MULTISTREAM CLONE AUTO Color presets are available for adjusting color settings. Increases or decreases the [RED], [GREEN] or [BLUE] color depending upon which is selected. The change in color will appear on screen and the direction (increase or decrease) will be shown by the bars. sRGB (color preset mode [4]) dramatically improves the color fidelity in the desktop environment by a single standard RGB color space. With this color-supported environment, the operator could easily and confidently communicate color without further color management overhead in most common situations. The LCD panel's original colors that cannot be adjusted. Reduces blue light emitted from monitor. This item cannot be adjusted.

NOTE: You can directly change to [L/B] (LOW BLUE LIGHT) by touching the INPUT key for 3 seconds or more. Low Blue Light function substantially reduces blue light and helps to alleviate eye-strain. For changing to other settings from [L/B], touch the MENU key to show OSD menu and enter Color Control System. When [L/B] is selected in Color Control System, [CONTRAST] and [DV MODE] are disabled. The white point color temperature and the gamma curve are set to a DICOM simulation. This item cannot be adjusted.

NOTE: Do not use for diagnostic purposes. The gamma curve is adjustable through application software.

NOTE: When [MOVIE], [GAMING] or [PHOTO] is selected as the [DV MODE], [NATIVE] is selected automatically and cannot be changed. Controls the volume of the speakers or headphones. To mute the speaker output touch the ECO/RESET key. Selects the method of video detection when more than one video input is connected. When the current video input signal is not present, the monitor searches for a video signal from the other video input ports. If the video signal is present in another port, the monitor switches the video source input to the detected video source automatically. The monitor will not look for other video signals while the current video source is present. Video input signal detection is not enabled. Selects the DisplayPort mode.

NOTE: When the monitor has no image, refer to "Multiple monitors connection" on page 23. Sets SST (single-stream transport). Default is [CLONE]. Displays in SST (single-stream transport) or MST (multi-stream transport). [AUTO] should be selected when using MST (multi-stream transport).* If multiple monitors are set to [SST], an individual image is displayed at each monitor. *: MST (multi-stream transport) and SST (single-stream transport) require the computer display adapter supports the feature. Please refer to the user instructions for the computer or display adapter. English−40