Sharp EC-T5180A ECS5170 Operation Manual - Page 11

3 Empty dirt compartment. (Fig.21) Fig.21 4 Replace the net filter assembly into the dirt compartment. Be sure to match the marks of the Filter Compartment and Dust Cup. Upper Handle OPEN CLOSE Air Duct 5 Align the projection of net filter assembly to the slot of dirt compartment and follow the arrow to fit or turn to CLOSE side. Dirt Compartment Fig.22 Net Filter assembly Projection Slot Fig.23 STEP 2 6 Align the rectangular groove to the guide of vacuum cleaner then push to snap into place. (Fig.24) Rectangular Mark Groove Also marks are on Dust Compartment and Base. STEP 1 Guide Mark Fig.24 CAUTION: Do not use chemicals, bleach or hot water to clean the dirt compartment. Wash with soap and water using a soft brush. Do not dry with hair dryer or heater. NOTE: Very fine materials, such as face powder, plaster or fine powder may seal the filters and cause loss of suction. When vacuuming this type of material, be sure to empty the dirt compartment and clean the filters more frequently (before reaching the "Max Fill Line"). 11