Sharp EC-T5180A ECS5170 Operation Manual - Page 13

WHEN YOU FOUND ANY OBSTACLES IN THE HEAD COVER OR FRONT CHANNEL If you find some obstacles such as hair, paper slip, are caught inside the head cover or front channel, please try to remove with suction hose of this vacuum cleaner. (Fig.27) If this is not enough cleaning, please use some wooden stick for picking, or removing bottom plate and / or head cover for cleaning. Suction Hose Front channel Fig.27 HOW TO REMOVE / AND RESET THE BOTTOM PLATE Before replacing any parts, unplug the vacuum cleaner from the electrical outlet and release the handle. Then turn the vacuum cleaner over, exposing the underside. Four Screws REMOVE Loosen the bottom plate by unscrewing four screws, (Fig. 28) then remove the bottom plate. RESET Make sure that all the parts are properly position. 1 Insert the front three tabs of the bottom plate into the grooves at the front end of the nozzle head, then reset the bottom plate. (Fig. 29) 2 Fasten four screws. Fig.28 Three Tabs Fig.29 13