Sharp ER-A450T Programmer Manual - Page 18
ALL RAM Data Download PC -> ER-A450T - software
View all Sharp ER-A450T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
No Procedure on P.C. side Install "02FD.EXE" on the P.C. 1 ALL RAM Data UpLoad : Go to "2" ALL RAM Data DownLoad : Go to "9" 2 ALL RAM Data UpLoad ( ER-A450T -> PC ) "Execute "02FD.EXE" on P.C" *Don' t execute the other Software at the same time. 3 No Procedure on ER-A450T side 2 Place the SRV key in the SRV mode. Set the Communication method by "Setting" Button." 4 Push "OK" Button. 5 Push "POS -> PC" Button. And Select the Receiving File. Communication starts. 7 UpLoad is completed. 8 The initial Window is shown. "Push "Exit" Button." 9 ALL RAM Data Download ( PC -> ER-A450T ) Entry of JOB#996 in the SRV mode 996 6 ER-A450T shows @/FOR CA/AT 00000 UpLoad is completed. 8 9 Place the SRV key in the SRV mode.
No
Procedure on P.C. side
No
Procedure on ER-A450T side
1
Install "02FD.EXE" on the P.C.
ALL RAM Data UpLoad : Go to "2"
ALL RAM Data DownLoad : Go to "9"
2
ALL RAM Data UpLoad ( ER-A450T -> PC )
2
Place the SRV key in the SRV mode.
3
"Execute "02FD.EXE" on P.C"
*Don’ t execute the other Software at the same time.
4
Set the Communication method by "Setting" Button."
Push "OK" Button.
5
Push "POS -> PC" Button.
And Select the Receiving File.
6
Entry of JOB#996 in the SRV mode
ER-A450T shows
7
Communication starts.
8
UpLoad is completed.
The initial Window is shown.
"Push "Exit" Button."
8
UpLoad is completed.
9
ALL RAM Data Download ( PC -> ER-A450T )
9
Place the SRV key in the SRV mode.
996
CA/AT
@/FOR
00000