Sharp ER-A530 ER-A520 ER-A530 Operation Manual - Page 111

Department key positioning PGM 2 2119 You can assign a department code to each key position. Each key position has a corresponding key number. Departments may be freely selected for the number of department keys and their positions. To assign the department to a key position, select the key number of the position. For key number positions, refer to section "3 Standard key number layout" in chapter "KEYBOARD". Procedure 2119 . @ To program any key number Cancellation Key number (max. 3 digits) @ Dept. code (1 - 99) tÇ To program the next sequential key number Note The key number placement is determined by your local authorized SHARP dealer. Example Key operation 2119 . @ 1@1t 2 t Ç Print Key no. Color Video Monitor (CVM) control character PGM 2 2158 This programming enables you to assign each department with a number that can be used as a CVM control character. This number is converted to a two-digit character code that is transmitted for use with a CVM device. Procedure 2158 . @ Dept. code (1 - 99) To program any dept. To program zero @ CVM control character (0 - 255) t To program for the following dept. Ç Example Programming 16 as CVM control character for department 1 Key operation Print 2158 . @ 1 @ 16 t Ç Character code converted 109