Sharp FO-2080 FO-2080 Operation Manual for FAX Function - Page 72
Data Transfer - toner number
View all Sharp FO-2080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
DATA TRANSFER If there is a problem with the machine, you can use the Data Transfer function to have received faxes read into memory and then sent to a different fax machine for printing. This function is used when you cannot print received faxes, for example when the machine runs out of toner, or a misfeed occurs. To use this function, the fax number of the transfer destination machine must be programmed. Your fax machine Receiving fax machine Enter the fax number of the fax machine your want to transfer the data to. [Preparation] FW. RX DATA 1=YES 2=NO Select data transfer mode beep Transferred faxes are printed Transfer is only possible when a received fax is being held in memory because printing was not possible. In this Note case, "0:RX DATA TRANSFER" will appear in the display. Follow these steps to program the fax number of the transfer destination machine: 1 Press the [MENU] key. 4 Enter the fax number of the transfer destination machine with the numeric keys and press the [ENTER] key. Enter the transferring fax number (maximum 40 digits) by pressing the numeric keys. 2 Press the [ ] key ( ) or [ ] key ( ) until "0:RX DATA TRANSFER" appears, and then press the [ENTER] key. Selection "0:RX DATA TRANSFER" 3 Press the [ ] key ( ) or [ ] key ( ) until "2:FAX NUMBER" appears, and then press the [ENTER] key. Selection "2:FAX NUMBER" 5 Enter the name of the transfer destination with the numeric keys and press the [ENTER] key. 68