Sharp FO-2080 FO-2080 Operation Manual for FAX Function - Page 73
until 0:RX DATA TRANSFER
View all Sharp FO-2080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Follow these steps to use the fax transfer function: 1 Press the [MENU] key. 2 Press the [ ] key ( ) or [ ] key ( ) until "0:RX DATA TRANSFER" appears, and then press the [ENTER] key. Selection "0:RX DATA TRANSFER" 3 Press the [ ] key ( ) or [ ] key ( ) until "1:DATA TRANSFER" appears, and then press the [ENTER] key. Selection "1:DATA TRANSFER" 4 Press the [ ] key ( ) or [ ] key ( ) until "1:YES" appears, and then press the [ENTER] key. Selection "1:YES" The received fax is transferred. To cancel the transfer, select "2:NO" and press the [ENTER] key. If "NOT STORED FW.#" appears: The transfer destination number has not been programmed. Program the number and then transfer the fax. Note If you set the data transfer mode, when data cannot be transferred because the other fax machine was busy, or when the error condition on your fax machine is corrected, the data does not print out. To print the data, turn off the power to the fax machine, then turn it on again. SPECIAL FUNCTIONS 5 69