Sharp FO-5550 FO-5550 Operation Manual - Page 152

Optional Settings Setting 26: TELEPHONE BILLING CODE This setting allows you to use Department Codes or direct billing codes for telephone billing on a PBX. (Your dealer must first activate Department Control or direct billing code entry.) Press 1 to turn telephone billing on, or 2 to turn it off. ♦ Initial setting: 2 If you pressed 1, the BILLING CODE DIAL selection will subsequently appear. Press 1 if your PBX must receive the billing code before dialing a telephone number, or 2 if it must receive the billing code after dialling a telephone number. (Refer to your PBX manual or consult your PBX adminstrator for this information.) Note: If you select AFTER for the BILLING CODE DIAL selection, you must press the REDIAL key after dialing if you use the SPEAKER key. Setting 27: DEPARTMENT CODE DIGITS Use this setting if you are using Telephone Billing and need to change the number of digits of Department Codes to accord with your PBX's telephone billing system. Enter any number from 3 to 9. ♦ Initial setting: 4 Setting 28: DISTINCTIVE RING This sets the ring pattern to which your fax will answer if you subscribe to a distinctive ring service. Enter a number from 1 to 5 to select a pattern. See Distinctive Ring in Chapter 5 for more details. ♦ Initial setting: 5 150